d&b E-Pac

The E-PAC Power amplifier controller is a single channel amplifier with an internal controller for operating the d&b fullrange systems (passive systems) loudspeakers.
The controller incorporated in the E-PAC is based on a Digital Signal Processor, DSP, utilising sigma-delta signal conversion.
All operational states of the E-PAC as well as the pre- programmed system settings and configurations for the d&b loudspeakers systems are controlled with a front panel digital rotary encoder in conjunction with the Liquid Crystal Display (LCD).

SEND FORESPØRGSEL

Vil du gerne vide mere eller booke produktet? Skriv til os - Så vender vi til bage hurtigst!
Noter evt. tid og sted for dit arrangement, og om du selv henter udstyret eller ønsker levering.
OBS: Priserne er leje pr. døgn.

Varenummer (SKU): 772 Kategori: Tag:

Beskrivelse

The E-PAC has an additional linear configuration.

The E-PAC is specifically designed for high impedance loads (200 W into 16 ohms, 300 W into 8 ohms).
If low impedance (LO IMP) mode is selected the E-PAC can drive up to two 8 ohm or four 16 ohm loudspeakers, at reduced output (6 dB). This is useful for situations such as front fill or under balcony use where multiple loudspeakers are needed but maximum output is not required.
All the functions of the E-PAC, including programmable internal delay settings, can be remotely interrogated and altered via the RIB, Remote Interface Bridge and a PC.

Relaterede varer