Beskrivelse
The eNode 8 PRO is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet protocols. All 8 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the front are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode 8 PRO embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial.
Connections:
- 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
- 8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)
Product Description
Additional Information
Documents
Downloads
FEATURES
(8) Universal DMX Ports (can be set as Input or Output)
(2) RJ45 TCP/IP 10/100M Ethernet Connections
Rotary Menu Wheel / Function Selection Button
LCD Menu / Function Display
PowerCON Power In
Auto MDI/MDIX, DMX-512, and ArtNet Support
ArtNet – DMX Bilateral Signal Conversion
DMX Splitter Function (1Input / 3 Outputs or 1A Input / 3A Outputs and 1B Input / 3B Outputs)
LCD Display & LED Indicators
Broadcast Mode (One Device Transmits Same Signal to Other Connected Devices)
Backup Mode
CONTROL / CONNECTIONS
(8) 5pin DMX Ports
(2) RJ45 TCP/IP 10/100M Ethernet Connections
Rotary Menu Wheel / Function Selection Button
LCD Menu / Function Display
PowerCON Power In
SIZE / WEIGHT
Length: 19.0” (482mm)
Width: 6.3” (160mm)
Vertical Height: 1.7” (44mm)
Weight: 4.6 lbs. (2.1kg)
ELECTRICAL / THERMAL
AC 100-240V – 50/60Hz
7W Max Power Consumption
35.6°F (2°C) to 113°F (45°C)
