Beskrivelse
LM 44 giver dig 4 input/4 output analog konfiguration, der er velegnet til en bred vifte af systemets signalbehandling og routing applikationer. LM 44 giver også 8 × 8 AES3 digital I / O og 4 × 8 Dante netbaseret I / O, alle med omfattende signal routing til at give Dante break-in/break-out og failover funktionalitet. To LM 44 enheder kan stables og sættes op til at fungere problemfrit som et enkelt 8 × 8 processor.
LM 44 omfatter:
- Mix-matrix and system EQ between FOH console
and loudspeaker system - Line driver and system EQ for self-powered loudspeaker systems
- Inserted EQ for monitor systems
- Dante break-in/break-out
- Transmission system to and from FOH and stage L /stage R
4-in/4-out Lake® Processor
- Raised Cosine Equalization™
- Linear phase and classic crossovers
- LimiterMax™ peak and RMS limiters
- Maximum available delay of 2 seconds
Audio Inputs og Outputs
- Analog with Iso-Float™ ground isolation
- Digital AES3 8-in/8-out
- 4-in/8-out Dante networked I/O
- Gigabit Dual Redundant Dante™ by Audinate® audio networking
Front Panel
- Daylight-readable display
- Dedicated Module Input and Output LED Metering
- Dedicated Module Input and Output mute buttons with LED
- Dynamic buttons and rotary encoder for parameter adjustment
Performance
- High quality A/D and D/A 24-bit conversion
- 96 kHz internal sampling frequency
- 32-bit floating point internal data path
Kontrol
- Full control via Lake Controller software application
- Software configurable GPIO
