Palmer Media DI Box

Stereo DI Box. Super til at tilslutte computere, smartphones og andre mediaplayers med minijack, RCA eller jack. 


Vil du gerne vide mere eller booke produktet? Skriv til os - Så vender vi til bage hurtigst!
Noter evt. tid og sted for dit arrangement, og om du selv henter udstyret eller ønsker levering.
OBS: Priserne er leje pr. døgn.

Varenummer (SKU): 643 Kategori: Tag:


 PRO MEDIA DI/ PLI-04. With the new PRO MEDIA DI/ PLI-04, Palmer introduces a DI-box, produced with the discerning needs of the computer-age media in mind. Using this uncomplicated method, personal computers and other consumer equipment with unbalanced outputs can be converted to balanced, in order to carry out, e.g., a presentation over a professional PA system. The PLI-04 accommodates all the common input types, TRS jacks accepting mono or stereo plugs, RCA phono sockets and a 3.5mm stereo jack input for use with the headphone output of a Laptop or similar device. The outputs are conventional transformer balanced XLR sockets, as used in professional PA systems, guaranteeing an electrically decoupled signal, a prerequisite to ensure noise-free operation. One other special feature which should not be forgotten! Although the PLI-04 is primarily a stereo unit, it can be switched to mono, with the two stereo signals summed and fed to both XLR outputs. The PLI-04 manifests a mechanically robust unit combined with outstanding technical specifications, adding to the list of high quality products that have come to be expected from Palmer. 

PLI04 Specifications:


  • 2x 6.3mm TRS-Jack 
  • Tip= +phase (hot) 
  • Ring= -phase (cold) 
  • Sleeve= screening 
  • Ground 
  • 2x RCA phono sockets  
  • 1x 3.5mm stereo jack 
  • Input Impedance: 6 kohms at 600 ohms 
  • Load Input Level: 6dBu   30Hz/0.05%THD 16dBu  30Hz/0.33%THD (All measurements taken with 200 ohms source) 


  • 2x XLR male 
  • Pin 1 ground 
  • Pin 2 pos. phase (hot) 
  • Pin 3 neg. phase (cold) 
  • Transformer balanced 
  • Output Impedance: 600 ohms 
  • Gain reduction input to output: 10dB 
  • Transformer ratio: 3.16 : 1 
  • Frequency response: 20Hz – 20kHz ± 0.5dB 
  • Phase response: less than 3°degree deviation 
  • Mono switch 3 position ground lift switch: lift, ground, soft ground 
  • Aluminium die cast housing: 125 x 95 x 35 mm